View Full Version : Help needed to install Telescope

20-05-2009, 02:55 PM
Dears just bought a Chinese AirGun with Tesco telescope.
Have installed the telescope but could not adjust the target through it.Have never used telescope before so if anyone has installed or used it, guide me.

20-05-2009, 03:11 PM
Check out these videos:




20-05-2009, 03:12 PM
The best thing to do is get help from a friend who knows how to mount one and learn by seeing him do it :)

That is how i do it :)

20-05-2009, 03:23 PM
zeroing a rifle with a scope isnt that difficult.

your scope will have two knobs on it. you'll need a screw driver (depeding on the model of the scope) or perhaps the knobs turn themself in which case you don need the screw driver.

one knob moves the target line verticaly (up and down) and the the second moves it horizontally (left to right). pretty simple but this will point you on how to do it.


20-05-2009, 07:23 PM
Got it thankx.... was little confused !

Conceal Carry
20-05-2009, 08:24 PM
it's easy but needs to be done systematicaly and methodically. could only be done at a minimum 25 m range. a little knowledge of geometry helps.:)

Conceal Carry
21-05-2009, 11:02 PM
Any success? we are waiting for the feed back and you have not yet posted the pics.

21-05-2009, 11:40 PM
There was something wrong with the telescope.Replaced it.Now its fine.
Soon will post pics...i thought you have forgotten the pics !

Conceal Carry
22-05-2009, 12:24 AM
it's fun taking pics, posting used to be pain in the neck though, but not after new software.

22-05-2009, 07:24 PM
I was talking about this one...

http://www.postimage.org/aVc1CBJ.jpg (http://www.postimage.org/image.php?v=aVc1CBJ)

Conceal Carry
24-05-2009, 09:34 PM
Congratulations again, nice gun. how accurate is it upto 100m?