PDA

View Full Version : Custom made handgun carry box.



kasana
03-06-2011, 05:53 PM
basic material used in this job.
aluminium box
water proof sheet
sheep lather
hair drier
foam sheet
hard disc media magnate
sand paper
surgical blade
samad bond...


First of all, cut water proof sheet according to the size of the box.
then, draw sketch of a hand gun on this sheet..
cut along the sketch and make all edges smooth using sand paper.
then cut a foam sheet same as the water proof sheet and place it over the water proof sheet and attach sheep leather over it.
Stick lather on the inner moldings first and then on the outer molding and heat by a hair drier to remove wrinkles.
to make the base take 5m water proof sheet and fix hard disk media magnets on the back side that will keep the handgun and magazine attached so that they do not fall when the box is picked up.
then attached foam to the front of the base and covered it with lather.
finally fixed the base and handgun frame in the box and the handgun carry box is ready!

kasana
03-06-2011, 06:00 PM
more pictures

kasana
03-06-2011, 06:04 PM
more pictures....

Naveed_pk
03-06-2011, 06:19 PM
Nice work Kasana bro :) also share the estimated price on all the work done . Thanks

Viking
03-06-2011, 06:35 PM
bro good work but u steal my idea:P

jawin
03-06-2011, 06:37 PM
Great work man! Very neat & quality finish. :peace:

Best Regards

Nazim Sahib
03-06-2011, 06:47 PM
Amazing peice of work........

Mitho
03-06-2011, 07:15 PM
Where can we find a alumunium box in khi?

kasana
03-06-2011, 07:32 PM
Nice work Kasana bro :) also share the estimated price on all the work done . Thanks
Thanx for apriciation naveed bro.
I done this job in 1200 aprx.

kasana
03-06-2011, 07:36 PM
bro good work but u steal my idea:P
Thanx viking bro.
Now i m planing to make a wooden box. U can try my idea

kasana
03-06-2011, 07:42 PM
Great work man! Very neat & quality finish. :peace:

Best Regards


Jawin bro u can also get this kind of finish.
Use 10mm to 12mm water proof sheet sheep leather and hair drier for neatness.

kasana
03-06-2011, 07:43 PM
Amazing peice of work........

Thanx nazim bro

451F
03-06-2011, 07:45 PM
you done excellent work.congrats

kasana
03-06-2011, 07:49 PM
Where can we find a alumunium box in khi?

Mitho bro u can get this kind of box from any artificial jewlary shop or from any super store. If u wanna get something different u should check any antique furniture shop.

ACHILLES
03-06-2011, 07:58 PM
kASANA bro you have done splended job but you should have added some locking mechanism to the front and should have padded the inner side of the top lid.

kasana
03-06-2011, 08:07 PM
kASANA bro you have done splended job but you should have added some locking mechanism to the front and should have padded the inner side of the top lid.
U r right bro
There were many ideas in My mind for locking mechanism but it effected the neatness so i use hard drive media magnits. It catches the gun and magzen very solidly.

silkenkage
03-06-2011, 08:08 PM
@kasana
Nice....

kasana
03-06-2011, 08:11 PM
you done excellent work.congrats

Thanx alot brother

ALI GUJJAR
03-06-2011, 08:22 PM
Great work man! Very neat & quality finish

ACHILLES
03-06-2011, 08:26 PM
I think with little bit of refinement you can produce those boxes for sale as well.

coolbox18
03-06-2011, 08:27 PM
Kasana bro

Very nice work indeed.

Avais
03-06-2011, 11:43 PM
Amazing work done Kasana brother.

Wolf Hunter
04-06-2011, 12:12 AM
Excellent efforts man.Your hard work is expressed through the quality work you presented

Madham
04-06-2011, 09:52 AM
nicely done brother... specially i liked the color scheme... more padding should be there on the top cover just in case of a jerk which loosens the gun or magzine out of the socket.

AK47
04-06-2011, 10:03 AM
Excellent work! Thanks for sharing.

May I ask, can cutting of gun lines be done more accurately, efficiently, say using some sort of CNC scanning, etc???? I'm not into these terms, kindly ignore my naivety, if any!

And Kasana bro, if you could have posted a review as detailed as this one, but on the actual use of this all-steel Baikal MP-446 monster, there'd be quite some members here in appreciation of that, lolz!


Regards.

MIdreesTaj
04-06-2011, 10:09 AM
Kasana, what a craftmanship shown by you dear your love of guns manifested in luxury bedding for your beloved. All hand made and by yourself, the carry box is a priceless artifact indeed.

SkeetShooter
04-06-2011, 10:34 AM
Nice work Kasana bro you have shown ur love for the gun which sure every lover of the gun does want to. And now for sure i am going try to make hand made case n stuff for my pistol from my own hands it would be fun...... Keep up with the good work and please keep on sharing your valualbe ideas.Thanks alot.

Trigger_happy78
04-06-2011, 12:02 PM
Nice work bro. Very impressive

Amjad Ali
04-06-2011, 05:13 PM
@ KASANA

are you from CHINA

you did good work i am impersed thanks for sharing

jawin
04-06-2011, 06:02 PM
@ KASANA
Yes Brother! Please share a detailed Review of your All Steel MP 446 Viking.
We ll really appreciate that.

Best Regards

jawin
04-06-2011, 06:11 PM
I have heard members saying that the Steel version of MP 446 lacks in Finishing but your Viking seems more adorable than Polymer One.

Regards

Usama
04-06-2011, 06:38 PM
Amazing job !!

kasana
04-06-2011, 07:33 PM
nicely done brother... specially i liked the color scheme... more padding should be there on the top cover just in case of a jerk which loosens the gun or magzine out of the socket.

Thanx for the apriciation bro.
The frame socket wud hav givn an 'overlook' if i'd done extra padding.
Gun n magzn hav been attached to the base using magnets.
So they don't fall out even if the box is inverted.
The guns seems to be loose in the socket but actualy its firmly attached to the base.

kasana
04-06-2011, 07:40 PM
Excellent work! Thanks for sharing.

May I ask, can cutting of gun lines be done more accurately, efficiently, say using some sort of CNC scanning, etc???? I'm not into these terms, kindly ignore my naivety, if any!

And Kasana bro, if you could have posted a review as detailed as this one, but on the actual use of this all-steel Baikal MP-446 monster, there'd be quite some members here in appreciation of that, lolz!


Regards.

Thanx sooo much ak47 bro.
You can get the same finish and fitting as CNC machine cutting with electric cutter also.
Initially i'd cut very neatly but the pistol fitted too tightly which gave a better look but the tight fitting could ruin the pistol's colour and the leather could also be damaged in few months.
Thats why it was given a loose cut afterwards.
Although the pistol seems loose but its firmly attachd to th base.
During designing and making the case It was kept under consideration that neither the gun shud be damaged nor shud it be difficult to remove during emergncy.

kasana
04-06-2011, 07:42 PM
@ KASANA

are you from CHINA

you did good work i am impersed thanks for sharing

Yes bro am from china

I live in chak number 263 chen yaan

Hahahaha
Bro am from fsd

kasana
04-06-2011, 07:46 PM
I have heard members saying that the Steel version of MP 446 lacks in Finishing but your Viking seems more adorable than Polymer One.

Regards
No bro its wrong

It looks beautiful and solid then polymer version. I gives a very solid look. Grip is awesome. Great balanced gun.

kasana
04-06-2011, 07:47 PM
Kasana, what a craftmanship shown by you dear your love of guns manifested in luxury bedding for your beloved. All hand made and by yourself, the carry box is a priceless artifact indeed.

Adrees bro thanx so much.
Everyone has liked the colour combination and it was indeed ur idea.
Without ur advise such a look n finish cud nt hav been achievd

PakistanFirst
04-06-2011, 07:51 PM
Nice workmanship.

Enigmatic Desires
04-06-2011, 08:01 PM
Beutiful work.. u should consider it full time

HussainAli
04-06-2011, 11:21 PM
Dear Kasana Bro, Now this is what I call Innovative and worth of looking at the art,

WELL DONE BROTHER, very well done !!!

Regards

Waqas
05-06-2011, 02:09 AM
kasana yara cha gay ho , very awasome job ......... mera box kahan hay :)

Mani
06-06-2011, 09:59 PM
Excellent efforts bro.

kasana
06-06-2011, 11:59 PM
Nice workmanship.

thanx brother

kasana
07-06-2011, 12:00 AM
Kasana bro

Very nice work indeed.

thanxx soooo much bro. am doing work on my new project. pray for me

kasana
07-06-2011, 12:01 AM
kasana yara cha gay ho , very awasome job ......... mera box kahan hay :)

dont worry lala ji.....
trying to get another box

Denovo87
07-06-2011, 12:06 AM
dont worry lala ji.....
trying to get another box

Try finding 2 boxes Kasana bro, another lala is getting ready for Faislabad ;) very nice, innovative and practical solution for Viking to sleep cozy .

Avais
07-06-2011, 12:51 AM
thanxx soooo much bro. am doing work on my new project. pray for me
OUr prayers are with you for the good job.

Asiftt
07-06-2011, 10:17 AM
Very skillful @ kasana brother
can i get one too , lolz

HUNTER1
08-06-2011, 01:48 PM
Nice one...

Virk
20-06-2011, 01:48 PM
Cool Box & excellent explaination...... Good Work.

Syed Adeel
20-06-2011, 03:05 PM
Sweetly lulled, soundly and colorfully closeted! Very well done Kasana sahib! Beautiful!

Furrukh
20-06-2011, 09:42 PM
Very creative brother. Perhaps you can start your own brand......

minhal110
22-06-2011, 11:33 AM
great piece of work bro kasana...how much the box cost ?

Skeeter60
27-06-2011, 01:56 AM
Very encouraging and nice effort. Pl keep up your good work

TYR
29-06-2011, 02:56 PM
Bravo! its always a delight to see the creative DIY side of our members. VERY NICE!!