PDA

View Full Version : .30 Pakistani (Crown) or China 636



atifkamal
11-10-2010, 10:09 AM
AOA, I have just bought a Pakistani 30 bore pistol, a few of my friend after looking that gun advice me to get it replaced with China 636.
As this china one is more relible than this pakistani and it does not miss fires, it will not stuck, plus it will not heat up if you fire something 5 or 6 round, he said that you can't even hold it from barrel side after emptying your magzi
while one friend told me both are same and both will get hot in same manners :(

so any advice from pakguns weather i go for change or not ?
off course there is $$$ difference for which i have to think a bit :P

i have to replace this why not i get it done today as i have purchased a couple of days before... may be the dealer will consider and do not cut back much $$$.

thnkx,

Syrianar
11-10-2010, 10:28 AM
Changing your .30 Pakistani is a good idea as Pak made tts are not generally reliable, but as far as the mater of heating goes there is no difference if you fire from which ever gun its barrel is going to become hot,its got nothing to do with the gun but its the heat generated from the bullet firing.

atifkamal
11-10-2010, 10:40 AM
Thnx syrianar,
ok today i will visit there and see how much dent will be on my pocket :( as the friend made my buy this tt say that it will not give you back the amount you paid (bayshak tum nay 2 din pehlay purchase ki ho aur use bhe na ki ho)

I asked china's one will cost 16k or 17k.

whats you suggestion ? i am thinking if the dealer deducts 1000-1500 then it will be ok to get a loss 1-1.5k.
bcoz i am just about to go dco for new weapon entry so i thought why not change now prior to get entry from dco.

(agar nahi karta tu pakistani he theeeeek hai bhai !)

Rizshu
11-10-2010, 12:04 PM
better changed your pakmade with 636. its a very nice weapon, and you will enjoy and will come to know after you use it.

soo my advice is to change with 636.

zeeshan.pk
11-10-2010, 11:23 PM
Atif dear ,it is better for u to go for Zastava .30 that is far better than even Chinese,but u wl feel more better if u go for 9mm imported

atifkamal
12-10-2010, 09:03 AM
Thanks friends, today i am going to collect china636 in replace of Hunter (Crown) it cost around 19k in total. Is the price is ok as the dealer is not intended to come down more...
As say i am not deducting on your old one.
please confirm me price as i have to go in afternoon.....

Syrianar
12-10-2010, 10:37 AM
The price 19k seems to be ok for the Chinese tt. Go for it you will not regret it.

atifkamal
12-10-2010, 10:40 AM
hmm, ok then i will go for it....

atifkamal
12-10-2010, 02:44 PM
hmm got it in 20k, dealer said its new one... aaa like p3 model is 19k and its new arival p4 cost 20k, i asked what is the difference ?

Got to know that the metal used in new one is slightly good from previous God Knows!

I dont know but i would say that finishing like magzine insert, ejcection portion and what you say the tip of slider of pak made gun seems good (obviously i am not expert)

any comments ?

SAJJAD ALI
12-10-2010, 02:48 PM
atifkamal congrates on purchasing chinese TT plz upload some photos of your gun.

atifkamal
12-10-2010, 02:51 PM
sure tomorrow Insha Allah...

Salman_Ahmed
12-10-2010, 03:03 PM
congratulations on ur new purchase
Hope it serves u well

Regards.

Faisal Aziz
12-10-2010, 03:51 PM
hmm got it in 20k, dealer said its new one... aaa like p3 model is 19k and its new arival p4 cost 20k, i asked what is the difference ?

Got to know that the metal used in new one is slightly good from previous God Knows!

I dont know but i would say that finishing like magzine insert, ejcection portion and what you say the tip of slider of pak made gun seems good (obviously i am not expert)

any comments ?
Congrats brother. :) I have a tt 636 which I bought in 1995. I fired more thn 2000 bullets till today without facing any problem.Hope u will enjoy it. ;)

Syrianar
12-10-2010, 03:54 PM
Congrats Bro, but don't forget to post pictures

Zaheer
12-10-2010, 04:51 PM
Congrats BRO and difference b/w P3 and P4 is Pentium 3 and Pentium 4 Respectively :lol:

Ali Akbar
12-10-2010, 04:54 PM
congrats brother on ur new purchase.hope it serve u well

atifkamal
13-10-2010, 09:07 AM
Assalam O Alaikum,
@Zaheer, it means if would give 'em 1K more then there is a chance I may get a dual core or 1k more for quad core :lol: sounds interesting PCs have become really very cheap....


here is the look...

http://s1.postimage.org/lvNZ0.jpg (http://postimage.org/image/17nyy2004/)


http://s1.postimage.org/lvQt9.jpg (http://postimage.org/image/17o0llchw/)


http://s1.postimage.org/lvSYi.jpg (http://postimage.org/image/17o294ozo/)

Zaheer
13-10-2010, 10:25 AM
Atifkamal bhai Nice Pistol.Great Chamkila thing.You have the same carpet which was at my old flat :)

Rizshu
13-10-2010, 11:37 AM
nice. congrats on yr purchase

Amjad Ali
13-10-2010, 12:53 PM
its better then pakistani pistol congratulations on your purchase

Rizshu
13-10-2010, 12:56 PM
@atifkamal does it come wd safty

atifkamal
13-10-2010, 01:31 PM
thnx bros : )

@Zaheer: yea "chamkila" i am also thinking about this... but my friend said it will be ok with the passage of time ; dont worry... so i have to wait and see... :P
Carpet ! yea just replaced this one as previous one got many holes due to my soldering iron :P and i was tired of lecture
from high command!

now i am looking some other lab. bench :(

@Rizshu: safety ?? *shurg*

Zaheer
13-10-2010, 03:30 PM
Chamkila means great in my sense and do use solder on a table which I do at home and ya its a great pistol as from the days I was in love with arms 636 is the first one which I loved.

atifkamal
13-10-2010, 04:14 PM
@zaheer: lolz, actually we use to say "chamkila" for that is NOT sober... or you can say like some air gunz with colorfull strap garnished with small mirrors hope u are getting my point...
any way thnx for chamkila compliment :P

yea offcourse used table for soldering jobs and ruined a little, now using glass topped side table :)

Zaheer
13-10-2010, 04:26 PM
Hahaha ! like guns with chamat patti like a bus in Karachi called W-11.

atifkamal
13-10-2010, 04:36 PM
Exactly : )

u made me recall that word "chamkili party" lolz....

atifkamal
16-10-2010, 11:05 AM
@atifkamal does it come wd safty

Rizshu: i was waiting for your reply ... what safety you are talking about ?

noumanzaidi
16-10-2010, 11:19 AM
@atifkamal

congratulations brother on your new purchse

Aquarius
16-10-2010, 12:29 PM
Congratulations on your new TT.. :)

hskhan2k2
25-11-2010, 04:17 AM
boss pakistani crown is a really really tough gun i never seen in my life this kind of gun in 30 bore.......my personall experience with it ....no ftt no ftp no jamming problem i fired in a series around 200 rounds no problem at all and feel good to me...well i normally dont keep pak made guns but this one if good peice so dont change it....with 636 ..in pakistani 30 bore this model is highly recommended pistol.....thanx indeed

jonnyc
28-11-2010, 01:54 AM
Can you please post the full headstamp on those .30 Bore cartridges? I see the 311, but I can't read the date (??) on the bottom.
Thank you.

Mani
28-11-2010, 01:46 PM
congrats on yr purchase

Rizshu
25-12-2010, 09:38 PM
Rizshu: i was waiting for your reply ... what safety you are talking about ?

i am talking about simple safty brother. :) i've heard from someone that 636 has a safty with it.

PUNJTANI5
23-05-2011, 08:29 PM
does your chinese 636 come with a 5 yr replacement warrantee ?

if not stick with local made tt
at least it can be repaired easily

OZZY
17-01-2012, 12:52 PM
Dear, How much it cost and from which dealer u got it.is in karachi?

tokrev33
26-05-2012, 08:49 PM
Hunter/ Crown is an absolute crap atif replace it with china 636

tokrev33
26-05-2012, 08:50 PM
no one give warranty for imported items but they worked, however I have heard that Khyber arms are giving 1 year warranty.

Abu-Bakar Khan
05-06-2012, 07:03 PM
Dear All; AOA;
I want to purchase .30 caliber, plz guide me from where to purchase and and which type.
I am from Lahore Cantt.
Thankyou

Enigmatic Desires
05-06-2012, 10:26 PM
whats your budget?

tokrev33
15-07-2012, 10:18 PM
Dear HSKHAN2K2 one of my friend got a crown pistol his experience was owful lots of problem magzine stuck several time, fte may be he got a lemon.


boss pakistani crown is a really really tough gun i never seen in my life this kind of gun in 30 bore.......my personall experience with it ....no ftt no ftp no jamming problem i fired in a series around 200 rounds no problem at all and feel good to me...well i normally dont keep pak made guns but this one if good peice so dont change it....with 636 ..in pakistani 30 bore this model is highly recommended pistol.....thanx indeed

Enigmatic Desires
16-07-2012, 12:34 AM
I think it depends on hte mood of the maker. If he is in a good mood he just might take the trouble to make a good product. otherwise.....

Safdar Mahmood Khan
19-07-2013, 03:03 AM
636 are better pistols