PDA

View Full Version : After 300+ rounds and 6 months



ALI GUJJAR
03-10-2010, 08:26 PM
I used this gun 6 months a go and 300+ rounds


http://s3.postimage.org/Cw5yS.jpg (http://postimage.org/image/266zx1cp0/)

ALI GUJJAR
03-10-2010, 08:28 PM
http://s3.postimage.org/CyDc0.jpg (http://postimage.org/image/269xrfkas/)

ALI GUJJAR
03-10-2010, 08:30 PM
but i have a problem i am not able to clean it


http://s3.postimage.org/CAatA.jpg (http://postimage.org/image/26bq9e3k4/)

Topak
03-10-2010, 08:52 PM
rust problem !
put the barrel in diesel for 48 hours,then clean it.
i cleaned my pistol with it,using a drill machine.but be careful while using drill machine,it can injure you seriously.

ALI GUJJAR
03-10-2010, 08:56 PM
rust problem !
put the barrel in diesel for 48 hours,then clean it.
i cleaned my pistol with it,using a drill machine.but be careful while using drill machine,it can injure you seriously.
thanks

Txshooter
04-10-2010, 09:26 PM
Bro is this a pistol barrel? I don't
see any grooves in it.

ALI GUJJAR
05-10-2010, 10:57 AM
Bro is this a pistol barrel? I don't
see any grooves in it.


http://s1.postimage.org/G4Un0.jpg (http://postimage.org/image/2dfuadmbo/)



http://s1.postimage.org/G4Zmi.jpg (http://postimage.org/image/2dfxlgbb8/)

http://s1.postimage.org/G5dk9.jpg (http://postimage.org/image/2dg7ioe9w/)

askhokhar
05-10-2010, 11:00 AM
Bro is this a pistol barrel? I don't
see any grooves in it.


The grooves are surely visible ... just click on the image and you will see enlarged image

Avais
05-10-2010, 08:37 PM
Dip the barrel in petrol for 30 minutes and clean with soft brush.

zeeshan.pk
09-11-2010, 10:41 PM
use Wd40 and leave for 60 min in sunshine ,then clean it properly and softly wd cotten,every thing wl be o.k

SPAYPANTHER
09-11-2010, 11:25 PM
an other product RUSTO NIL is also good for your gun

assad ahmad nawab
10-11-2010, 12:51 AM
dip it in petrol , and clean with rust cleaner spray

SPAYPANTHER
10-11-2010, 08:34 AM
dip it in petrol , and clean with rust cleaner spray
petrol??? think again

Rizshu
10-11-2010, 06:47 PM
@ Txshooter
the grooves are visible, i can see them.

malik4696506
08-05-2012, 08:27 PM
zeeshan
plz give me some advise regarding your post i clean my pistol with wd 40 it has some rust marks outside barrel.after some days i find my pistol barrel color is fainted(the silver color of barrel is turn to black) is this is due to wd40 or some other reason.the color is fainted only from the space where rust marks are appear.

Muhammad m
09-05-2012, 01:22 AM
zeeshan
plz give me some advise regarding your post i clean my pistol with wd 40 it has some rust marks outside barrel.after some days i find my pistol barrel color is fainted(the silver color of barrel is turn to black) is this is due to wd40 or some other reason.the color is fainted only from the space where rust marks are appear.

Sir i think WD 40 is not a cleaning solvent.
Its used in rusty parts. There are special solvents for barel cleaning but i believe WD 40 does the job

Muhammad m
09-05-2012, 01:24 AM
also after cleaning, i use a bit of oil or grease (good quality) on the slides and the outer areas of the barrel.

bestmagician83
09-05-2012, 09:18 AM
ALWAYS USE NASA SPRAY for the gun cleaning.

Asif Ali
09-05-2012, 10:44 AM
zeeshan
plz give me some advise regarding your post i clean my pistol with wd 40 it has some rust marks outside barrel.after some days i find my pistol barrel color is fainted(the silver color of barrel is turn to black) is this is due to wd40 or some other reason.the color is fainted only from the space where rust marks are appear.

Use Brunox for cleaning, you can also use Hopes Gun Powder Solvent for cleaning barrel and after drying apply a very thin layer in barrel everywhere with Hope-9 Oil.

raptor69
10-05-2012, 01:42 PM
Use Brunox for cleaning, you can also use Hopes Gun Powder Solvent for cleaning barrel and after drying apply a very thin layer in barrel everywhere with Hope-9 Oil.

Is it safe for the barrel to apply oil inside it. I mean i was under the impression that when you fire, the temprature inside the barrel does make the oil boil which in return can be harmful for the barrel. Because of that i have never applied oil inside the barrel. Whenever i clean my pistol i clean frame, slide & barrel with burnox and then apply a thin layer of oil only on the frame, slide & outside barrel never inside it. Correct me if iam wrong...

Asif Ali
10-05-2012, 03:37 PM
Bro. you can apply a very very thin layer of oil, the oil should not be dripping. Clean excess oil and watch the barrel inside from one end to check it is slightly oiled. It is necessary as Karachi have very high humidity resulting higher chances of rusting.
Apart of barrel, I even now use a best quality grease because whenever i analysed the frame and slide after firing, oil got vanished and slide was considerably dry. Grease serve my intended purpose now:)
After 100+ rounds clean the gun by complete stripping and oil/grease each part.