View Full Version : Bretta 92 Taurus 92/99 Parts Interchange

30-09-2010, 03:50 PM
Topic says it all.. has anyone a list of parts that are fully compatible?

The Below list is a general guide only, it is not meant to be an official source and is subject to mistakes.
In general the list is pertaining to recent production (say 1990 - current) models, very early taurus stamped 92's was identical to the early beretta model and they have since diverged, such old taurus 92's and indeed beretta 92's of that era are fairly far and few between.

Current Compatibility List

Confirmed Beretta->Taurus Compatible:
Barrel (after market manufacturers list barrels for both taurus and beretta compatible)
Guide Rod
Hammer Spring
Locking Block
Slide Catch/Stop/Release, & Spring
TakeDown Button Spring
Magazines (older early taurus with heal release)
Recoil Spring

Suspected Beretta->Taurus Compatible:
Lanyard Loop (older taurus without internal lock)
Take Down Lever *taurus has slightly smaller shaft, may possibly work on some examples*
Trigger bar

Magazines (behind the trigger release)

Definitely Not Compatible:
Takedown Button (beretta has notch on opposite side of the shaft)
Grips & Grip Screws
Hammer (has extra notch that prohibits installation) (Decocker models confirmed incompatible, possibly compatible on pre-decocker taurus < 1990-92ish)
Lanyard Loop (newer models with internal lock has a hole threw lanyard loop plug)
Mag Catch/Release
Trigger (beretta trigger is a little longer, trigger guard on taurus is thicker then beretta)

Trigger Pin, & Spring
Hammer Strut
Locking Block Plunger, & Pin
Firing-Pin Assembly
Extractor, Pin, & Spring
Sear, Pin, & Spring
Ejector Pin
Lanyard Loop Pin

Source taurusarmenet

Silent killerr
30-09-2010, 07:24 PM
Nice information. Can you plz share the source of this info?

01-10-2010, 11:41 AM
Its already visible ..

Silent killerr
01-10-2010, 11:46 AM
You mean "Source taurusarmenet"?
atleast you should highlight or write the source in commas. Anyway thanks

Ahsan Tauheed
01-10-2010, 12:24 PM
Usama nice share u r learning quickly ;) ;) ;)

01-10-2010, 03:06 PM
You mean "Source taurusarmenet"?
atleast you should highlight or write the source in commas. Anyway thanks

Bro , i always do the very same way :)

Usama nice share u r learning quickly ;) ;) ;)

Thanks Bro :) .. by the way its been more then a month since we last met ?? :(
how about a range session next week ?