The Gun Digest Book of Automatic Pistols Assembly/dissassembly

[Nabeel]

http://books.google.com.pk/books?id=1lRy3Y6ZtU4C&pg=PA568&lpg=PA568&dq=M20,M213(9mm)&source=bl&ots=7kRlo2tj9u&sig=dMsrMQaqBpHWVwgRP8vMZiGBvbg&hl=en&ei=67DASevhJ9LEkAWH8_gu&sa=X&oi=book_result&resnum=1&ct=result#PPP1,M1

[R Shahreyar]

Very nice book Nabeel.

[Glocky]

Tried opening it but apparently preview is limited, any rapidshare links to this one

[Mohammad]

very good one

[Connector]

http://books.google.com.pk/books?id=1lRy3Y6ZtU4C&pg=PA568&lpg=PA568&dq=M20,M213(9mm)&source=bl&ots=7kRlo2tj9u&sig=dMsrMQaqBpHWVwgRP8vMZiGBvbg&hl=en&ei=67DASevhJ9LEkAWH8_gu&sa=X&oi=book_result&resnum=1&ct=result#PPP1,M1
Nabeel this link is a good reference.Just for the info of all Glock owners.If you dissassemble
the striker from the firing pin spacer sleeve make sure while assembling it back the spring cups are placed at 90 degrees to the end of coil of the spring.Since the spring cups are two halves if not placed in this manner they are likely to get unseated.

[Mastermind]

thank for the book nabeel

[Nabeel]

thank you all for appreciation

[9mm Luger]

nice find!

[Silent killerr]

nice link