View Full Version : Query > need help in stripping a CZ45 .25

11-07-2010, 05:57 AM
Hi i need help in strip cleaning my CZ45 .25 cant figure it out

11-07-2010, 09:53 AM
The following info is taken from Wiki, and therefore, reliability is an issue...

Disassembly is similar to the Browning. Remove the magazine and make sure the chamber is empty. Draw the slide back about 1 centimeter and rotate the barrel clockwise a quarter-turn. Remove the barrel and slide forward off the receiver. Other than the guide rod and recoil spring, there are no small parts that come loose.

From http://en.wikipedia.org/wiki/CZ_45

Hope this helps. Meanwhile, I am trying to find some other source to back this up.


The CZ45 and the later CZ92 are essentially the same product, apart from a few cosmetic changes here and there. I suggest you take a look at the Instruction Manual in the following link:

This being a link on the original CZ website somewhat confirms what is mentioned in Wiki.

11-07-2010, 02:05 PM
THANK YOU KAGEFOX now i can finally get to cleaning a weapon that has bin in my family for about half a century

11-07-2010, 02:56 PM
Just be careful while doing the disassembly. You never know what to expect from such an old pistol, especially if it has not seen much maintenance over the years...

11-07-2010, 03:01 PM
thanx for the concern Kagefox brother but i am starting a complete restore project on this one ill be posting pictures in another thread that i have started