View Full Version : Looking for an arms manufacturer

30-06-2010, 06:10 PM

I'm looking for a gunsmith who can make a VSS Vintorez ( non-firing, just a replica ) and of course Pakistani (or Afghan) The manufacturer must speak english (I don't speak urdu) and he must be meticulous because I need an "exact" replica.

Thank you in advance.


30-06-2010, 06:34 PM
Wellcome to PakGuns Spok.Perhaps a little introduction from your side will be helpful.We will try to find a manufacturer which can make your 'replica' of VSS.

30-06-2010, 06:39 PM
welcome to the club, i am sure you are here for good :)


30-06-2010, 08:03 PM
Welcome to PG bro.

01-07-2010, 11:16 AM
welcome aborad broter

01-07-2010, 01:47 PM
welcome to pakguns spok brother, update ur location
each and every query of urs regarding guns will be quenched here

Amjad Ali
01-07-2010, 02:30 PM
wellcome to pakguns ( The manufacturer must speak english (I don't speak urdu) ) my dear friend most of the afghan`s & pakistani arms manufacturers can`t speak even urdu properly you just find any body show him physicaly your gun & then place the order but you have to face different types of wrong promises by manufacturer .

01-07-2010, 07:40 PM
That's why I'm asked you, I don't want to loose my time with an improper manufacturer.

02-07-2010, 10:58 AM
@Spok, another way around the problem might be to hook up with a forum member nearest to you whenever you plan to come for getting it made. the many highly knowledgeable members in Peshawar can easily bridge the communication gap that you're talking about.

02-07-2010, 02:15 PM

welcome to pakguns....
members from Peshawar can help you

02-07-2010, 06:22 PM
So, does someone from Peshawar can help me in my projet?

03-07-2010, 12:17 AM
Give us details..i am here to help you :)

03-07-2010, 12:25 PM
My entire project began with this replica made by a russian airsofter:

He wanted to mass produce it but didn't succeed because of his gas system too complex to ajust.
Here the details about his project:

Personnally, I will take a gas system quite similar to the real AS VAL with the gas store in the mag, so it's easier to make and which made his proof. Here a pic:

Now, to concretely start my project, I have to find a manufacturer who is technically able to make it (not especialy like the russian did it). I chose the Pakistani artisants for their knowedge of the russian weapons (so to looks like russian made) and also for the cheap price.

The manufacturer must be motived and meticulous.

Here some pics and videos about the AS VAL and the VSS Vintorez:



I hope now you see what my project is.


05-07-2010, 02:11 PM
So, does anybody from Peshawar can be my intermediary?

PS: only one FAMAS in stock. :lol:

Salahuddin Ayubi
05-07-2010, 03:31 PM
@ PsiFactor,

From his first post, it is clear that he's interested in getting a REPLICA made (something without any firing mechanism) and not the real thing.

05-07-2010, 04:34 PM
Thank you SA.
Like I said this is not a firearm but an airgun. ;)

05-07-2010, 04:52 PM
Hi Spok,
Please contact me at paradigms67@hotmail.com. I am sure I can put you in touch with the right person. Please do leave your telephone number so I may call you.

Amjad Ali
05-07-2010, 08:10 PM
can you tell us from which city you belong.

05-07-2010, 10:07 PM
I live in France so I don't think my phone number can help you.

06-07-2010, 10:08 AM
I live in France so I don't think my phone number can help you.
:O and here i thought they invented international dialing! silly me :)

Salahuddin Ayubi
06-07-2010, 12:28 PM
I live in France so I don't think my phone number can help you.
:O and here i thought they invented international dialing! silly me :)

:lol: +1

06-07-2010, 02:37 PM
It's just concerning the cost and the time zone my friend, but yes you are able to call me. ;)

06-07-2010, 04:27 PM
@Spok ..Moeen is one of the respected and senior members of PakGuns who is in direct contact with Arms manufacturers.He is the one who can make your replica so establish contact with him.

06-07-2010, 04:35 PM
i never thought this gun would be loved by someone for its design but now i think im wrong

12-07-2010, 09:59 PM
I didn't receive any reply from Moeen.

Are you still alive Moeen?
If yes, check your e-mailbox. ;)

12-07-2010, 10:42 PM
@SPOK btw when you are done making the guns would you mind if i could buy from you ??

13-07-2010, 02:27 PM
:lol: No prob. And if you want one of our others products, no problem too. ;)

For more info: KJ_00@hotmail.fr

PS: That's not guns but replicas.

13-07-2010, 04:03 PM
@ Spok these fire BBs ???

13-07-2010, 06:58 PM

13-07-2010, 11:43 PM
lemme know as soon as you get them done

14-07-2010, 12:14 AM
Salam All,
@Spok - I have not received any emails from you. Also Spok for your information - I have family living in North America whom I call about twice a week and have been for over five years. I think I can handle France easily... what do you think?? Its no more than a measly five hours behind us in time verses when I call the US/Canada which is over 10 hours time difference!
So the offer of help is there if you want. If you are just fishing around for attention then the offer is revoked.

14-07-2010, 01:39 AM
I just find the email less restrictive, I don't want to bother you when I'm calling, because personnaly I don't have much free time so I call when I can. ;)

Any way, you have my email, if you find a manufacturer just leave me a message.

Amjad Ali
14-07-2010, 07:15 PM
spok brother if you want to make a gun in pakistan by your desire , thats no problem but the manufacturer will not give you the fittness & reliablety certificate. So i think you should keep in touch with dear SIR MOEEN , he will lead you the right way for your project .

Amjad Ali
14-07-2010, 07:16 PM
wish you best of luck for your slection