PDA

View Full Version : CLEANING TUBE MAGAZINe



SPAYPANTHER
12-04-2010, 05:57 PM
That tip is for cleaning shotgun’s tube magazine which is difficult to disassemble, like chinese pump action etc…

A few days ago I was thinking about my shotgun’s magazine which was getting rust…
And! As we know “ZARURAT IJAD KE AMI HEN” ;) to hum na bhe ya ijad karde…
Let’s see it…

SPAYPANTHER
12-04-2010, 05:58 PM
Take 5to6 used 12gauge cartages, cut their tops and clean them...

http://img404.imageshack.us/img404/3407/12042010033.jpg

http://img519.imageshack.us/img519/8062/12042010034.jpg

SPAYPANTHER
12-04-2010, 06:00 PM
Now take a clean fabric piece and apply any cleaner which you use and set it on the top of first cartage as given blow…

http://img210.imageshack.us/img210/5485/12042010035.jpg

SPAYPANTHER
12-04-2010, 06:01 PM
Know insert it in tube magazine and start PUSH PULL motion
then insert one more shall, and again some push pull motion of cartages in magazine…
in this way insert all cartages

http://img405.imageshack.us/img405/3356/12042010036.jpg

SPAYPANTHER
12-04-2010, 06:02 PM
http://img156.imageshack.us/img156/8721/12042010037.jpg

SPAYPANTHER
12-04-2010, 06:04 PM
now when you will remove cartages, and fabric will come out, you will find it is gating rust etc... and further magzin is gating clean…

Nazim Sahib
21-06-2010, 05:37 PM
Let me tell a easier way.I have a mossberg Model 500 and this is how i did it.Remove the barrel and if u can see the end of the tube section and can see the spring pour oil or whatever u have in it.Then tke a ramrod and stick it into the magezine tube......put alot of cloth so it shoudl be able to give a good cleaningWhen i tried it the cloth came out covered in rust and eventually it got nice and clean:)

SPAYPANTHER
21-06-2010, 11:42 PM
sir g its very difficult to remove the barrel of chines pump action thats way ETNE PAPAR BELNE PARTE HEN

Usama
23-06-2010, 11:06 AM
Spayphanter
Come over my place to clean my shotgun as-well ;)

noumanzaidi
23-06-2010, 12:31 PM
yes quite informative

Amjad Ali
23-06-2010, 12:46 PM
ur activity is good but u used lubricant WD 40 i think it`s `not good for cleaning it`s may be couse of fire or damp during range and if u have nothing another option then after use this dry ur
gun/pump action in the sunlight for few minutes otherwise as ur wish to do. THANKS

Ahsan Tauheed
23-06-2010, 01:08 PM
Spayphanter
Come over my place to clean my shotgun as-well ;)

@ Spaypanther i also need a good arms cleaner guy :P :P :P dont get that much free time to spent for my beloved babies :mad: :mad: :mad:

PUNJTANI5
11-07-2010, 07:24 PM
very useful info brother spay panther indeed

PUNJTANI5
10-09-2010, 02:23 PM
i use a tube brush NYLON , although metallic tube bruches are also available
then screw it on the rod
then attach it on the chuck of drill machine

disassemble all the shotgun
plug one end
fill the tube with a cleaning mixture of petrol diesel and mobiloil 1:1:1 some wd 40 for taste
and then put the brush on mouth of tube
operate the drill machine and work all the way in and out of the tube
one minute job and the inner bore of magazine or barrel is squeeky clean