PDA

View Full Version : Beretta 92fs clone Silver Finish



Immy
27-10-2009, 10:04 AM
Salam to all members. I am new to guns and Pakguns.com. This is my first gun I purchased from Gujranwala city. Its a higher finish 92fs clone . There was one in black for 22k and this I paid 28k, Its slightly lighter than the other clones I saw at the shop. I am interested in changing the grips along with the silver screws as well. There are many clones in the market and hard to tell which one is better, but there were some differences in the finishing of the 22k clones. This seems to be of a better quality and finish so I purchased it. back in the UK and USA you can only dream of owning a weapon after so many checks. So in Pakistan one can acquire a weapon and yes I did manage to get the all Pakistan licence. Leave me any feed back if possible.
:D
http://s3.postimage.org/1dWv7A.jpg (http://www.postimage.org/)

http://s3.postimage.org/1dWCC0.jpg (http://www.postimage.org/)

http://s4.postimage.org/V0Hrr.jpg (http://www.postimage.org/)

http://s4.postimage.org/V0TV9.jpg (http://www.postimage.org/)

http://s3.postimage.org/1dWWz9.jpg (http://www.postimage.org/)

http://s4.postimage.org/V12TJ.jpg (http://www.postimage.org/)

http://s3.postimage.org/1dWZ3i.jpg (http://www.postimage.org/)

Ahsanfurqan
27-10-2009, 10:22 AM
good finishing and gun aswell.
to get maximum results use chinese or POF ammo,no local ammo at all....enjoy

Silent killerr
27-10-2009, 10:38 AM
very difficult to differentiate between orignal and this one

Topak
27-10-2009, 10:39 AM
welcome immy to pak guns..i am much happy to see one more pak gunner from gujranwala....
you got a good piece in clones, Pakistani gunsmiths has master the 92fs...they are more reliable than any other clone in Pakistan specially in 9mm.
from which shop you did bought this piece....
can i see this pistol personally?
here is my email just text me your cell i will call you and have a cup of tea with gup shup..
majedadvocate@yahoo.com

Monis
27-10-2009, 10:45 AM
Nice purchase. good luck

Fahim
27-10-2009, 11:04 AM
Nice gun Immy..! best of luck.!

Ali Akbar
27-10-2009, 11:34 AM
nice gun immy bro and happy shooting

Ka_Khan
27-10-2009, 12:38 PM
Nice Gun.Read all reviews about 92 FS clones in separate thereads.Our midrees taj is the 92 Clone expert.
The price you paid is little higher.It should not be more then 22K in your area.
Best of luck.

Abu Al Hawl
27-10-2009, 12:52 PM
immy bro, cool piece, but its called a cardinal sin to cock the hammer and put your finger on the trigger even if mag is empty and you do not intend to fire.

Salahuddin Ayubi
27-10-2009, 01:09 PM
immy bro, cool piece, but its called a cardinal sin to cock the hammer and put your finger on the trigger even if mag is empty and you do not intend to fire.

Do rakat namaz Salatul Tawba.

Yoosha
27-10-2009, 01:21 PM
immy bro, cool piece, but its called a cardinal sin to cock the hammer and put your finger on the trigger even if mag is empty and you do not intend to fire.

Do rakat namaz Salatul Tawba.


Hahahah.... the moment i saw that pic, i knew that soon ppl will line up to comment on the finger-on-the-trigger thing

Abu Al Hawl
27-10-2009, 01:29 PM
yoosha bachay, this is TANKEED BAR-I-TAMEER not TANKEED BAR-I- TANKEED.

SAJJAD ALI
27-10-2009, 01:39 PM
nice gun but paid too much

Immy
27-10-2009, 02:56 PM
Hey all, thankyou for welcoming to pakguns and also refreshing to hear positive comments fro members. Yes I appologise for the CARDINAL SIN hehehe as I said I am a new user of guns and also mentioned that I come to Pak for holidays only so never had a chance to learn all about handguns back in the USA. I would keep that in mind next time and would abstain by all mean to not to fire the gun empty. I dont think I paid too much for the gun as when you are getting a good quality mechandise there shouldnt be any compromise regarding the price. I have read several threads regarding the clonse in Pakistan and was also aware of the prices, but once again its like buying a replica rolex you get many grades starting from $25 to $1000 and they are just copies. I would like to change the grips and they are easily available in the USA also for $15-$20. Shockingly in America you can buy a beretta handgun from $250-$800. The prices for this model is over 250K in Pak which is rediculous. Khair, I live in the cantt area and the security situation is very tight these days so I am drooling to fire rounds. I am going to post the pictures of my childhood airsoft rilfe DIANA MODEL 50 and trust me you can seriously injure someone with this airgun even tho it look more like a full fledge rifle. I am using china bullets.

SHOP I PURCHASED FROM:
Sufi Sons , Gt road gujranwala next to Din plaza.

Ahsanfurqan
27-10-2009, 03:06 PM
btw did the shopkeeper told u from which factory he got this??? or who is the manufacturer?

Immy
27-10-2009, 03:23 PM
http://s3.postimage.org/1fqR70.jpg (http://www.postimage.org/)

http://s3.postimage.org/1fs9qJ.jpg (http://www.postimage.org/)

http://s4.postimage.org/WydCJ.jpg (http://www.postimage.org/)

http://s3.postimage.org/1ft3O0.jpg (http://www.postimage.org/)

This is the Diana Airgun model 50....some serious pressure in this rifle......

MY GERMAN SHEPHERD PUPPY 5 MONTHS OLD NOW........

Immy
27-10-2009, 03:26 PM
I Didnt ask the seller about the company it came from but this is what he told me that it was a special order for me and it took about a week for him to deliver. The normal clone he had was available but I wasnt satisfied with the finishing of it.

Fahim
27-10-2009, 03:31 PM
lovely puppy u got there..!

Alvi
27-10-2009, 03:33 PM
nice handgun sir .. :)

Ahsanfurqan
27-10-2009, 03:44 PM
he was right it must be a special order....because its finishing tells the quality

KageFox
27-10-2009, 04:17 PM
Welcome to the Forum Immy!

Very nice finish on your Beretta clone, hope it performs as well as it looks.

PS. Finger should only be on trigger if you intend to shoot....

Enigmatic Desires
27-10-2009, 08:18 PM
By an large most reputable companies such as Khyber arms and Frontier arms and even moon star put thair brand name on their weapons and they almost never write "made in Italy" .. Rather their guns bear the legend "Made as Italy" to show that their product has its own distinctive brand name..

Generally if a manufacturer doesn't put his own brand on a weapon he has produced he has nothing to lose.. Because regardless of how good a gun looks it is still essentially unbranded.. And God forbid if something goes wrong.. The company will not be held responsible..

A case in point. I recently visited KAC's Karachi dealers.. and they told me that their Beretta clones in .30 bore have been having problems and they have withdrawn their entire line..

AK47
27-10-2009, 08:53 PM
Nice handgun Immy, congrats! I find it somehow strange that a foreign settled member like you really wanted to buy local stuff! Yet, you got yourself a beautiful piece, and you're right, price should always be in relation to quality of item, not a set standard. I too do not mind paying a bit extra, over the standard, if somebody can put up something that really satisfies my craze.

Kamran_uk75
27-10-2009, 08:56 PM
Nice gun with nice finish

wasifali89
27-10-2009, 11:50 PM
i am also after this same thing

hope i also get a gud piece

krazy009
28-10-2009, 05:29 PM
nice piece immi....did u try it??? how its feels??? infact in local made handguns we see they are not reliable...they get jam....i wanna know wats its performance ????

MIdreesTaj
28-10-2009, 07:25 PM
nice piece immi....did u try it??? how its feels??? infact in local made handguns we see they are not reliable...they get jam....i wanna know wats its performance ????

local firearms when made with care are not unreliable. You need to identify their usual weak points and do required ammendments like some customer work on trigger, firing pin, extractor etc. When made good in compliance with the original designs, they work as reliable as originals.
As for durability, it comes down to good metal/alloy work which has higher price than usually available typical local firearm. This is because the intended market is not able/willing to invest extra on their firearm as per their superficial application, also followed by lack of education and awareness of what a firearm really is and why it exactly needs to be accurate.. reliable .. or durable.

MIdreesTaj
28-10-2009, 07:56 PM
Salam to all members. I am new to guns and Pakguns.com. This is my first gun I purchased from Gujranwala city. Its a higher finish 92fs clone . There was one in black for 22k and this I paid 28k, Its slightly lighter than the other clones I saw at the shop. I am interested in changing the grips along with the silver screws as well. There are many clones in the market and hard to tell which one is better, but there were some differences in the finishing of the 22k clones. This seems to be of a better quality and finish so I purchased it. back in the UK and USA you can only dream of owning a weapon after so many checks. So in Pakistan one can acquire a weapon and yes I did manage to get the all Pakistan licence. Leave me any feed back if possible.
:D

dear its quality piece in local 92s.. latest 92 clones which are of greatest local made quality has currently incorporated the light weight build feature(use light weight alloys) which is not considered in the medium quality 92 clones. The best beretta made is Pakistan can be recognised by its light weight, clear like real marking on both sides of slide, and nice original looking serial number markings over the aluminium frame(which is copied from M9s and American 92FS and unlike the Italian 92FS). They also are peculiar by the shallow modern type of rifling and bore is kind of polished smooth.
However this type of best Pak made 92 costs around 22K first asking price at Lahore neela gumbad market. Basically the gun is a 20K clone being gently and honestly sold at 22K. No higher quality clone availble to this one please note. These are from Salamat, Fazal and a few other known factories.
KAC clone specifically talked much on this forum is actually a good/medium clone however, range is 18-20K by the words of an honest gentleman dealer. Worst clones are also available for 15 or as less as 12K.
Prices asked as 24/25/27/28 K are all seller's tactics to earn more profit on this 20K firearm. I know Sufi & Sons basically he must also have added in his profit to the buying cost of this Pistol(probably he got it for you from Lahore) plus, dealers usually take benifit out of first time enthusiast weapon buyers.

Immy
29-10-2009, 04:39 PM
Dear friends, Thanks for the positive inputs and remarks regarding this clone. What if I had said that this was a real beretta 92fs and had it original italian box and the cleaning kit then would you all have believed its the real thing. Yes you can buy a clone for 22k locally but its not of the best finishing. This piece I have is surprisingly very light like the original and feels like a fake one when u hold it, its that light. Firing is awsome. You can fire as it were a brsted gun. I have no regrets so far and I am happy for what I paid for it. When you can get a great quality product special order for a few thousand rupees more then no big deal. If you need to get a piece like this it will only be a custom order. Thanks all and Happy Shooting.

Usama
30-10-2009, 09:56 AM
If the gun is realiable with No issues,excellent finnishing then @ 28k is little overpriced but Ok :)
as i heard probs with 18k 20k clones.

Glockcohlic
30-10-2009, 10:50 AM
Immy Welcome to the club.

Nice gun bro. Looks a gud colone, must be a delight to shoot.

Shoot Safe.

Malik1
31-10-2009, 10:12 PM
Welcome to forum and Nice Puppy and gun. Hope the puppy is not a clone :) Though I believe that both dog and gun should be pedigreed but especially.............. ;) Leave it to your judgement bro

Rizshu
31-10-2009, 10:41 PM
nice guns and dogee....:)

Immy
02-11-2009, 01:06 PM
Thanks for the support and postive comments members. Happy Shooting !

Maximus
03-11-2009, 11:07 PM
its a top notch clone as it looks like the real thing. hows the recoil and the overall experience?

Yardie Jutt
03-11-2009, 11:20 PM
i like all three esp the beretta clone it's lovely and very much closer to real one...:)

Yardie Jutt
03-11-2009, 11:24 PM
and kindly do let us know when you fire shots out of it's virgin barrel whether or not it justified it's cost and lived up to it's appearance...happy shooting :)

Immy
04-11-2009, 10:40 AM
salam Yardie Jatt & Maximus.....i wonder comment will be from Optimus Prime hahhahaa...firstly to Maximus, yes brother I popped the cherry the day I purchased the gun....Honestly speaking its light weight, and After firing shots I didnt feel any recoil, its as such shooting with a fake weapon and I am not just saying for the heck of it. Usually when you fire from a cheap gun you feel recoil and the next shot might not be as stable. SO its upto the shooters grip and the weapons response to a shot. I think I am extremely happy with this purchase. Thank God I dont have any enemies in Pakistan and I got this for stricktly sporting purposes. Can I afford the real one , yes sure I can but when you getting if not the same but similar performance for the fraction of the price why not get it. An ordinary person would never know its a clone only you know. If I had posted it as a real gun most of the members would have belived me heheeh....Maybe we should all get together and go for practice feild trip once there is some stability in the country.
Thanks Members.
Happy Shots.

Yardie Jutt
04-11-2009, 11:18 AM
salam Yardie Jatt & Maximus.....i wonder comment will be from Optimus Prime hahhahaa...firstly to Maximus, yes brother I popped the cherry the day I purchased the gun....Honestly speaking its light weight, and After firing shots I didnt feel any recoil, its as such shooting with a fake weapon and I am not just saying for the heck of it. Usually when you fire from a cheap gun you feel recoil and the next shot might not be as stable. SO its upto the shooters grip and the weapons response to a shot. I think I am extremely happy with this purchase. Thank God I dont have any enemies in Pakistan and I got this for stricktly sporting purposes. Can I afford the real one , yes sure I can but when you getting if not the same but similar performance for the fraction of the price why not get it. An ordinary person would never know its a clone only you know. If I had posted it as a real gun most of the members would have belived me heheeh....Maybe we should all get together and go for practice feild trip once there is some stability in the country.
Thanks Members.
Happy Shots.


that's very much just then :)
and yes i am of the same view that we should have a field shoot together cuz i really wana try your weapon...it's appetizing :P but for sure when we are out of this paranoia and that will be soon INSHA'ALLAH TALA :)

Salahuddin Ayubi
04-11-2009, 11:38 AM
deleted

Salahuddin Ayubi
04-11-2009, 11:45 AM
dear its quality piece in local 92s.. latest 92 clones which are of greatest local made quality has currently incorporated the light weight build feature(use light weight alloys) which is not considered in the medium quality 92 clones. The best beretta made is Pakistan can be recognised by its light weight, clear like real marking on both sides of slide, and nice original looking serial number markings over the aluminium frame(which is copied from M9s and American 92FS and unlike the Italian 92FS). They also are peculiar by the shallow modern type of rifling and bore is kind of polished smooth.

However this type of best Pak made 92 costs around 22K first asking price at Lahore neela gumbad market. Basically the gun is a 20K clone being gently and honestly sold at 22K. No higher quality clone availble to this one please note. These are from Salamat, Fazal and a few other known factories.

KAC clone specifically talked much on this forum is actually a good/medium clone however, range is 18-20K by the words of an honest gentleman dealer. Worst clones are also available for 15 or as less as 12K.

Prices asked as 24/25/27/28 K are all seller's tactics to earn more profit on this 20K firearm. I know Sufi & Sons basically he must also have added in his profit to the buying cost of this Pistol(probably he got it for you from Lahore) plus, dealers usually take benifit out of first time enthusiast weapon buyers.

Sorry for the above post. This post of MidreesTaj answers my query.

Amazing.

@ M Idrees Taj / Immy / others,

Is it possible to order this particular clone through some reliable Karachi dealer. If so, please advice.

Immy
04-11-2009, 12:21 PM
~Dear Salahuddin Bhai,
I am not sure whether you can buy this qulaity beretta in Karachi as I didnt purchase it from there. I bought it Locally through a dealer and I had to wait about 10 days for the delivery as it was a custom made as a special order. The normal clone that goes for around 22k was not to my satisfaction as the dealer had shown me that when I first went there. So after my questions he offered me this piece. I blindly trusted my instincts as our family deals with all the arms through them so I didnt hesistate and gave the order.
I was very happy to see this top quality and I was stunned by the fninishing and quality to every single detail. Its amazing how they can make a copy so perfect. I will however ask the dealer where was it made as he didnt tell me and I didnt bother to ask. You wont be able to get this as a daily retail item because normally no one wants to pay around 30k for a local handgun. I dont mind as its not hat expensive. If you buy a beretta 92fs CO2 airsoft pistol from the UK or USA it cost the same price around 30-35k pak rupees. So for that price I am getting a 9mm. I have no problems with its firing and its addictive to fire trust me on that. The recoil is un-noticable and its way lighter than the other clones in the market.
Spend your money wisely. I didnt buy an original one as its 4 times more money in Pak whereas you can get it for $500-$675 in the USA so its over priced way over head.
I hope it will have answered some of your questions .
Thnks...Immy

Salahuddin Ayubi
04-11-2009, 12:30 PM
@ Immy,

Thanks for the prompt reply.

Based on M. Idrees Taj's post (quoted below), this piece is being made by Salamat, Fazal and a few other known factories and are available in Lahore Neela Gumbad Market at 22k (asking price).

So if it is readily available in Lahore retail market, then my question is whether it is possible to have a piece ordered through a Karachi-based dealer. In any case, I have a scheduled visit to LHR early Feb and if something doesn't work out by then, I would be contemplating bringing one from LHR.

I already have a purchase finalized with one of PG's senior members for a Taurus PT 92 AFS SS 17+1 with rails NIB, however, having a total of three MOIs in the pipeline, I would be seriously interested in going for this clone too.

By the way our Admin Abbas posted a great strip-down comparison between a Taurus PT 99 and this particular clone earlier this year and posted the images as well. Its a great comparison and can be reviewed here http://www.pakguns.com/forum/viewtopic.php?id=111 .


dear its quality piece in local 92s.. latest 92 clones which are of greatest local made quality has currently incorporated the light weight build feature(use light weight alloys) which is not considered in the medium quality 92 clones. The best beretta made is Pakistan can be recognised by its light weight, clear like real marking on both sides of slide, and nice original looking serial number markings over the aluminium frame(which is copied from M9s and American 92FS and unlike the Italian 92FS). They also are peculiar by the shallow modern type of rifling and bore is kind of polished smooth.

However this type of best Pak made 92 costs around 22K first asking price at Lahore neela gumbad market. Basically the gun is a 20K clone being gently and honestly sold at 22K. No higher quality clone availble to this one please note. These are from Salamat, Fazal and a few other known factories.

KAC clone specifically talked much on this forum is actually a good/medium clone however, range is 18-20K by the words of an honest gentleman dealer. Worst clones are also available for 15 or as less as 12K.

Prices asked as 24/25/27/28 K are all seller's tactics to earn more profit on this 20K firearm. I know Sufi & Sons basically he must also have added in his profit to the buying cost of this Pistol(probably he got it for you from Lahore) plus, dealers usually take benifit out of first time enthusiast weapon buyers.

Immy
04-11-2009, 12:40 PM
Dear Salahudin Bhai,
I am sure I paid a few Ks more for the item. The silver finish is a little more as I was told. The blue finish is cheaper as I mentioned for 20-22k depends where you settle. I just believe that one should buy things locally even if you have to pay a little more. For instance, if there is something wrong with the item you purchase its such a hassle to drive ti lahore and maybe a few trips where you would end up spending more money on your commute. I would spend 2k on petrol each trip so its not worth it. The dealers have the right to make a litle bit of profit wont you agree. I didnt bother to go into details and bargaining. I am sure he would have given me a little discount lol maybe 1000 or 2000 the most but sometimes if you pay what ws demanded then you get better after sales service. This is just my opinion. I am new to guns and dont mind admitting it. Once you live in the west you dont really have any urge to use firearms and the licencing is not that easy either. So in Pakistan you can atleast fulfill your interest when it comes to firearms. I had initially also looked at taurus without the hammerhead in islamabad when I got my licence and it was retailing for 56k but I wasnt really happy with it as it had a pin not a hammerhead as the beretta. The beretta was quoted to me over 200k so I passed as after I go back my 9mm would be sitting in the closet so not worth spending that much. For the price I think its awsome and a great handgun you would agree once you use it also.
Good luck with your purchase.
Immy.

Salahuddin Ayubi
04-11-2009, 12:48 PM
Thank Immy for your feedback. Have a great time with your clone. It's a beautiful piece.

Ok guyz, this particular clone 'IS' available in Karachi at Famous Arms (talked to Mehmood just now) giving brother Sohail's reference. He says the black one is in stock at the moment and going at 20k while if one wants in SS finish, he'll order one, at the same price.

Moonstar also confirmed its availability, but the ***** who picked up the phone did'nt have the time to tell me the price.

Immy
04-11-2009, 01:09 PM
Great if you can ge the same piece for 20k I would not wait for a mintue and get it. But still have to be ordered. The one that is offered for 20k you can get the same here for 20k in gujranwala market as well. He will ask you more money for the SS finish and still you wont know if you are getting a better quality or same. Just ask yourself if someone is aksing a few more thousand more, why ? obviously if you are looking for better quality you also have to spend more money as well. I and so many other members have mentioned prior and currently that the better clones are over 25k in SS finish and the balck ones are cheaper. Make sure you get what you pay for and paying a few more thousand wont hurt , rather than going back n forth to the dealer for any problems. When something is expensive there is a reason behind it but we fall for lower quality just because it was cheaper. The cheaper the item more likely it will fall apart. With a normal cheap clone no dealer will offer you a lifetime warranty as I did becasue they are sure that the special order guns have to be made according to the customers standards not with cheaper materials. I hope I can put some sense into peoples minds and hey if one is such a gun lover whats wrong in paying a little more it wont hurt.
Good luck.

Salahuddin Ayubi
04-11-2009, 01:36 PM
No issue Immy with paying extra for better quality. I would be glad to pay even 25k if I am getting a good quality clone in SS.

However, I'm in no hurry at the moment. First will buy the Taurus. Then in a couple of month's time and after some window shopping and cross-checking, will pick the good-quality clone.

Immy
04-11-2009, 01:41 PM
OK S.Ayubi......taurus is also a great choice. Have fun.
Thankyou for your comments and enthusiasm.
Regards,
Immmy.

Enigmatic Desires
04-11-2009, 03:38 PM
Thank Immy for your feedback. Have a great time with your clone. It's a beautiful piece.

Ok guyz, this particular clone 'IS' available in Karachi at Famous Arms (talked to Mehmood just now) giving brother Sohail's reference. He says the black one is in stock at the moment and going at 20k while if one wants in SS finish, he'll order one, at the same price.

Moonstar also confirmed its availability, but the ***** who picked up the phone did'nt have the time to tell me the price.


Lols.. at the moonstar people Honestly SA u got off lightly.. I've been there a few times and am a customer.. But last time I was there.. I was almost thrown out for daring to point out that the 917c they were retailing for 65 is worth around 55k in the market..

But (sigh) I will go there again. they make such delectable clones and at prices lower then teh market.. (where their own factory's products are concerned.

as regards Famous arms clone.. Umm I have seen it.. unfortunately its not anything to write home about.. I gave it a miss..

Salahuddin Ayubi
04-11-2009, 03:42 PM
Thank Immy for your feedback. Have a great time with your clone. It's a beautiful piece.

Ok guyz, this particular clone 'IS' available in Karachi at Famous Arms (talked to Mehmood just now) giving brother Sohail's reference. He says the black one is in stock at the moment and going at 20k while if one wants in SS finish, he'll order one, at the same price.

Moonstar also confirmed its availability, but the ***** who picked up the phone did'nt have the time to tell me the price.


Lols.. at the moonstar people Honestly SA u got off lightly.. I've been there a few times and am a customer.. But last time I was there.. I was almost thrown out for daring to point out that the 917c they were retailing for 65 is worth around 55k in the market..

But (sigh) I will go there again. they make such delectable clones and at prices lower then teh market.. (where their own factory's products are concerned.

as regards Famous arms clone.. Umm I have seen it.. unfortunately its not anything to write home about.. I gave it a miss..

Thanks for the insight ED. Tell me when you're planning to visit Moonstar and I might tag along provided our schedules meet.

Btw, when Abbas posted his cloned Beretta 92 (which was of as good a quality as Immy's), the pics of which he posted in comparison with his Taurus 99, Sohail commented by saying that the same clones are available at Famous in SS. Is it possible that the ones you saw at Famous were some other clones and not the ones Sohail was referring to.

Enigmatic Desires
04-11-2009, 08:06 PM
Yeah.. SA.. There is no way I will dare go to Moon star alone. though I dont mind goin to his bro's shop in the same lane..

WEll. when I went to famous. He showed me FS clones in both black an SS and in 9mm as well as .30.. But the black one was miles better then the silver one..

All of em were from Sherpao arms.

Salahuddin Ayubi
04-11-2009, 08:11 PM
Then they were definitely not the one Immy's got.

Anyways, I'll keep an eye for these beauties. Lahore's visit is in Feb. Will visit Neela Gumbad Mkt.

9mm
01-05-2010, 02:54 AM
does any1 ve any idea wat ll be the cost of extra mags of 92fs clone ??

Pistol
01-05-2010, 06:41 PM
@Immy, Brother could you please give a firing range report on you 92FS clone. If possible please give pictures.

Kashifhabib
12-07-2010, 01:35 PM
http://s4.postimage.org/54YHi.jpg (http://www.postimage.org/image.php?v=aV54YHi)

I want to buy the Beretta (9mm) 92FS Stainless (ORIGINAL 2010 Model). Plz send to me detaile & Price in PAK Rs____.....???. And also how I can place the oder. Reason for buy Home purpose (Security).

I attached the imeage of desired model plz see that and reply must.
Reply,
Thanks,
Kashif Habib.
From Pakistan.
Cell DELETED

Kashifhabib
12-07-2010, 01:49 PM
Then they were definitely not the one Immy's got.

Anyways, I'll keep an eye for these beauties. Lahore's visit is in Feb. Will visit Neela Gumbad Mkt.

I want to buy the Beretta (9mm) 92FS Stainless (ORIGINAL 2010 Model). Plz send to me detaile & Price in PAK Rs____.....???. And also how I can place the oder. Reason for buy Home purpose (Security).


Reply,
Thanks,
Kashif Habib.
From Pakistan.
Cell DELETED.

Salahuddin Ayubi
12-07-2010, 03:21 PM
@ Kashif Habib,

It is against forum rules to display your cell numbers and email addresses. Please read our rules before you start posting. Non-compliance will lead to a BAN.

Thaireem
30-07-2010, 01:38 AM
salamalykum immy can you please give me the shop name of where you bought the beretta in the nice finish??

PUNJTANI5
01-08-2010, 05:21 PM
immy bhaiyya

are u sure this gun is a clone not a real one
and how much did u pay 4 it

i personally think this is a real deal

thepatriot
05-08-2010, 04:46 PM
immy dear,
is there a black clone available in the same quality...

wasifali89
06-08-2010, 07:30 PM
yes there is

with the same metalurgy

JarriG36C
13-08-2010, 05:22 PM
I have a similar 92FS clone which i got for 22k
very light and very similar to the one you have there
but the best pistol i have seen so far is the Makarov 9x18mm
russian

wasifali89
13-08-2010, 09:12 PM
i dont know why everyone dies on the makarov

my dad also says to find one but i really hate it

American Lockpicker
17-08-2010, 01:30 AM
immy bhaiyya

are u sure this gun is a clone not a real one
and how much did u pay 4 it

i personally think this is a real deal

I agree that does look real especially with the plastic guide rod.

Aquarius
17-08-2010, 01:51 AM
i dont know why everyone dies on the makarov

my dad also says to find one but i really hate it

wasifali brother may I know the reason why you hate it.. its the best conceal carry gun with reasonable firepower, excellent accuracy and trigger, exceptionally reliable.. last time few days back during visit of AK47 brother visit to Peshawar, we asked the dealer about the price of that old Russian 8 rounder Makarov in good condition, and believe me what was the cost quoted by the dealer.. 150K :o