PDA

View Full Version : Problem with 30 Bore TT



iaminhas76
17-08-2013, 12:34 PM
I have 30 Bore TT Norinco China Made its working normally before i store it aprox for 1 year after proper servicing.
Now its malfunctioning Its Loaded normally but not fire but if i removed the magazine its fired normally. Please seniors / experts advise what to do.

380ACP
17-08-2013, 01:59 PM
you mean if you pull the trigger the hammer does not strike on firing pin ? Or it does but the firing pin failes to strike the primer ? If the hammer does not strike i suggest you to field strip the gun clean it throughly with NASA or WD40, and try again if the problem continues try changing magz i hope it will work, besides this problem is more common with desi tts not chinese get your gun checked by an expert as well better if you can post the pics of stripped gun but close ups.

380ACP
17-08-2013, 02:02 PM
by field stripping i mean the whole gun take out the hammer assembly as well

Dr Zakir
17-08-2013, 02:07 PM
I fired my chineese after about 15 years and it was not stored properly and it fired without any problem I should about 30 rounds no ftf or fte

iaminhas76
17-08-2013, 02:27 PM
Hammer strikes but the firing pin failes to strike the primer

380ACP
17-08-2013, 02:43 PM
but when you remove the mag and the bullet is still in chamber and on second strike it fires ?

Black Commando
17-08-2013, 04:23 PM
I think there is some rust in the mag tube which create trouble for the firing pin

iaminhas76
17-08-2013, 05:38 PM
but when you remove the mag and the bullet is still in chamber and on second strike it fires ?

Yes, its fired when mag removed and bullet chambered

380ACP
17-08-2013, 05:44 PM
ok just field strip the gun take out the hammer assembly remove tye grips and clean the handgun with wd 40 or nasa and try again

Dr Zakir
17-08-2013, 06:04 PM
Yes I think cleaning with wd 40 should do the trick

Fudgepacker
18-08-2013, 12:33 AM
I always use wd40 on my guns before storing. Ones in active use get Ballistol treatment.
Did you try again yet?

Mian Jee
18-08-2013, 04:20 PM
I have 30 Bore TT Norinco China Made its working normally before i store it aprox for 1 year after proper servicing.
Now its malfunctioning Its Loaded normally but not fire but if i removed the magazine its fired normally. Please seniors / experts advise what to do.

Just exchange it with a new one, it won't cost you more than your satisfaction.