PDA

View Full Version : Need Help: 12GAUGE Plz Respond



myt
29-04-2013, 01:33 PM
As per your given formula i have mixed equal parts of ZIC ATF, Kerosene Oil, Mineral Spirit & Thinner to make Gun Cleaner. What came out is Light Pink Suspension (Just like Rooh Afza Milk).
Now i am suspicious about whether i have got it right or screwed it? Please advise.

12GAUGE
29-04-2013, 08:27 PM
Bro, The recipe for Pakguns Cleaner goes like this:

mix equal parts of:

1. Kerosene (Commonly available Mitti ka Tail from Hardware store)
2. Methylated Spirit (Commonly available spirit from Hardware store)
3. Paint Thinner (Commonly available at Hardware store, Kindly ask for THE STRONG stuff)
4. Automatic Transmission Fluid (any quality DEXRON-3 standard)

now if you mix those, you'll find that the whole solution sort of looks like rooh-e-afza milk (milk diluted with red drink). if you let the solution sit for a while that the whole solution seperates into individual layers of the liquids that make up the solution. thats OK. just a quick shake will turn the solution back into its desired rooh-e-afza like state. just remember to label it "POISONOUS - DO NOT DRINK". kindly keep the solution in a glass bottle. PG cleaner if made using quality ingredients is strong enough to eat through ordinary plastic bottles.

Recipe for PG-Lubricant:

Mix equal parts of:

1. Kerosene
2. Automatic Transmission Fluid (any quality DEXRON-3 standard)
3. Motor-oil (any quality synthetic grade)


WARNING:

1. mix in well ventilated area only
2. do not store indoors
3. do not use on painted finishes
4. do not use on wooden furniture
5. do not use on plastic parts

Regards.

myt
29-04-2013, 08:30 PM
Thanks brother.

12GAUGE
29-04-2013, 08:38 PM
Thanks brother.

you are most welcome brother.

Regards.

jagga
29-04-2013, 08:56 PM
carefull with that mix bro only use it on bare metal parts.....keep it away from plastic,paint and wood

Aquarius
29-04-2013, 09:17 PM
Bro, The recipe for Pakguns Cleaner goes like this:

mix equal parts of:

1. Kerosene (Commonly available Mitti ka Tail from Hardware store)
2. Methylated Spirit (Commonly available spirit from Hardware store)
3. Paint Thinner (Commonly available at Hardware store, Kindly ask for THE STRONG stuff)
4. Automatic Transmission Fluid (any quality DEXRON-3 standard)

now if you mix those, you'll find that the whole solution sort of looks like rooh-e-afza milk (milk diluted with red drink). if you let the solution sit for a while that the whole solution seperates into individual layers of the liquids that make up the solution. thats OK. just a quick shake will turn the solution back into its desired rooh-e-afza like state. just remember to label it "POISONOUS - DO NOT DRINK". kindly keep the solution in a glass bottle. PG cleaner if made using quality ingredients is strong enough to eat through ordinary plastic bottles.

Recipe for PG-Lubricant:

Mix equal parts of:

1. Kerosene
2. Automatic Transmission Fluid (any quality DEXRON-3 standard)
3. Motor-oil (any quality synthetic grade)


WARNING:

1. mix in well ventilated area only
2. do not store indoors
3. do not use on painted finishes
4. do not use on wooden furniture
5. do not use on plastic parts

Regards.

Very informative 12GAUGE bro..

1) So do you mean we should,nt use it in polymer handguns ??

2) If its not suitable to store it in plastic & wooden containers then how about storing in glass bottles ??

3) Can it be used to remove superficial rust on a weapon ??

hsnmz
29-04-2013, 09:55 PM
It will be most suitable for barrel cleaning especially in removing the plastic fouling

12GAUGE
30-04-2013, 01:31 AM
Very informative 12GAUGE bro..

1) So do you mean we should,nt use it in polymer handguns ??

2) If its not suitable to store it in plastic & wooden containers then how about storing in glass bottles ??

3) Can it be used to remove superficial rust on a weapon ??

1) Bro, you can only use it to clean metal parts. it is not recommended to clean polymer parts with PG-cleaner as it contains thinner which is mostly acetone which can harm polymer and plastic parts.

2) yes sir, I always recommend storing PG-cleaner in glass bottles.

3) In my humble opinion, PG-cleaner is will not remove superficial rust. for that you should give diesel or WD40 a shot.

Regards.

jagga
06-05-2013, 05:58 AM
best stuff you can use to remove rust is Automatic Transmission Fluid (any quality DEXRON-3 standard)
just soak the rusted item in it for several days and it will come out rust free